Anarchy IPA (10L)

  • HoppyHoppy
  • ResinousResinous
  • CitrusCitrus
  • FruityFruity
Sale price$40.95
Coopers Club price: $36.86  Log In to Access

A revolutionary ale to keep an eye on, for beneath the surface, an undercurrent of malt is quietly bolstering an uprising of aromas and flavours. Confident overtones of citrus, lychee and tropical fruits lead the fray, followed closely by light malty sweetness on the tongue, before a defiantly smooth yet bitter finish pulls everything back into order.

$20 flat rate shipping
Recipe Contains

1 × Coopers Australian Pale Ale (740g)
1 × Coopers Brew Enhancer 3 (1kg)
1 × Light Crystal Malt (100g)
1 × Simcoe Hops (25g)
1 × Cascade Hops (25g)
1 x Coopers American Ale Yeast (15g)
1 × Carbonation Drops (250g)

Beer Style: IPA

Colour (EBC): 11
Volume: 22L
Difficulty: Advanced

ABV 6.2%

Alcohol by Volume

30 IBU

International Bitterness Units

EBC 11

Colour

This Recipe

Print Recipe
Ingredients

1 x 740g Coopers Australian Pale Ale
1 x 1kg Coopers Brew Enhancer 3
1 x 100g Light Crystal Malt
1 x 25g Simcoe Hops
1 x 25g Cascade Hops
1 x 15g Coopers American Ale Yeast
1 x 250g Coopers Carbonation Drops

Mix

The Day Before: Line a pot (at least 2 litres) with a mesh cleaning cloth (pulled straight from the pack).
Place the Light Crystal Malt in a plastic zip-lock sandwich bag & crack them using a rolling pin.
Add the cracked Light Crystal Malt and 1 litre of cold water, fit the lid and sit in the fridge overnight.
Brew Day: Gather up the corners of the mesh cloth and lift, allowing the liquid to drain from the malt back into the pot.
Place the strained liquid onto the stovetop and bring to the boil.
Add half the packet of Simcoe Hops, boil gently for 5 minutes and then remove from the heat.
Cool the liquid by placing the pot in a bath of cold water for about 15mins.
Add the Coopers Australian Pale Ale, the Brew Enhancer 3 and the cooled hop and malt liquid to the fermenting vessel (FV) then stir to dissolve. Don’t be concerned if lumps of Brew Enhancer persist as they will dissolve over the course of several hours.
Top up with cold tap water to 5 litres and stir thoroughly.
Check the temperature and top up to 10 litres with warm or cool water (refrigerated if necessary) to start the brew at 18°C.
Sprinkle the Coopers American Ale Yeast then fit the lid.

Home Recipes ANARCHY IPA (10L)

Anarchy IPA (10L)

A revolutionary ale to keep an eye on, for beneath the surface, an undercurrent of malt is quietly bolstering an uprising of aromas and flavours. Confident overtones of citrus, lychee and tropical fruits lead the fray, followed closely by light malty sweetness on the tongue, before a defiantly smooth yet bitter finish pulls everything back into order.

Anarchy IPA
Beer Style IPA
Flavour Profile Hoppy, Resinous, Citrus, Fruity
Alcohol Content 6.2%
Colour (EBC) 11
Bitterness (IBU) 30
Volume 22L
Difficulty Advanced

Ingredients

1 x 740g Coopers Australian Pale Ale
1 x 1kg Coopers Brew Enhancer 3
1 x 100g Light Crystal Malt
1 x 25g Simcoe Hops
1 x 25g Cascade Hops
1 x 15g Coopers American Ale Yeast
1 x 250g Coopers Carbonation Drops

1. Mix

The Day Before: Line a pot (at least 2 litres) with a mesh cleaning cloth (pulled straight from the pack).
Place the Light Crystal Malt in a plastic zip-lock sandwich bag & crack them using a rolling pin.
Add the cracked Light Crystal Malt and 1 litre of cold water, fit the lid and sit in the fridge overnight.
Brew Day: Gather up the corners of the mesh cloth and lift, allowing the liquid to drain from the malt back into the pot.
Place the strained liquid onto the stovetop and bring to the boil.
Add half the packet of Simcoe Hops, boil gently for 5 minutes and then remove from the heat.
Cool the liquid by placing the pot in a bath of cold water for about 15mins.
Add the Coopers Australian Pale Ale, the Brew Enhancer 3 and the cooled hop and malt liquid to the fermenting vessel (FV) then stir to dissolve. Don’t be concerned if lumps of Brew Enhancer persist as they will dissolve over the course of several hours.
Top up with cold tap water to 5 litres and stir thoroughly.
Check the temperature and top up to 10 litres with warm or cool water (refrigerated if necessary) to start the brew at 18°C.
Sprinkle the Coopers American Ale Yeast then fit the lid.

2. Brew

Place the FV in a location out of direct sunlight and ferment at 18C to 22C.
Fermentation should take around 5 to 7 days.
On day 5, add the remaining Simcoe Hops and all the Cascade Hops (we recommend wrapping them in a mesh cleaning cloth, pulled straight from the wrapper).
On day 7 check the specific gravity (SG).
Check the SG again the following day and so on.

3. Bottle

The brew is ready once the SG has stabilised over 2 days, expect about 1012 to 1015.
Gently fill clean PET bottles to about 3cm from the top.
Add 2 carbonation drops per bottle and secure the caps.
Store the bottles upright in a location out of direct sunlight at or above 18C.

4. Enjoy

After at least two weeks, check for sufficient carbonation by squeezing the PET bottles.
When ready to drink, chill the bottles upright.
The chilled beer may be poured into clean glassware, leaving the sediment behind.
Expect the alcohol content to be approximately 6.2% ABV.

Common Questions

Tag #CoopersDIYBeer to be featured